MEPCO Bill Calculator 2026 – Estimate Your Electricity Bill
Enter the current unit reading from your meter and estimate your upcoming electricity bill using the MEPCO bill calculator provided below. This tool is designed for consumers who wish to know their potential bill amount based on current electricity usage before the actual bill arrives. Using the calculator is simple: just enter your consumed units into the tool below, and it will display an estimated bill amount based on those figures. This helps you effectively plan your monthly budget and understand how changes in electricity consumption might impact your bill.
Check Your Bill
MEPCO Bill Calculator 2026
This is an estimate only. Your actual MEPCO bill may include different FPA, duties, quarterly adjustments, arrears, taxes or other applicable charges.
The tool is also useful when your actual bill is higher than usual; you can enter your consumed units to generate an estimate and compare it with your actual bill. Please note that the figure shown by the calculator is only an estimate, not the final bill. The actual bill may include FPA, taxes, surcharges, and other applicable charges, which can vary over time or due to changes in per-unit rates. Enter your units into the calculator below to get an instant estimate of your expected electricity bill.
You can use the bill calculator to estimate your upcoming electricity bill based on the units you have consumed. In the calculator, you will need to input your consumed units and select the appropriate options regarding consumer category and connection type (e.g., domestic). The calculator displays an estimated bill by combining basic electricity charges with various applicable surcharges. Please note that this figure is merely an estimate, not the actual bill; the actual electricity bill may differ.

Step 1: Enter Units Consumed
First, enter the electricity units consumed during the current month into the calculator. For example, if your meter shows that 300 units were consumed this month, enter “300” in the “Units Consumed” field. To get an accurate estimate, ensure you enter the exact number of units consumed during the current billing period.
Step 2: Select ‘Protected’ or ‘Unprotected’
This selection is primarily relevant for domestic connections. Select “Protected” if your household’s electricity consumption has been 200 units or less in every month over the past six months. Check the consumption details for previous months on your MEPCO bill to verify your status. If consumption exceeded 200 units in even a single month during this six-month period, select “Unprotected.” The “Protected” or “Unprotected” classification does not apply in the same way to shop, office, factory, or agricultural connections.
Step 3: Select Your Consumer Category
Now, specify the purpose for which the electricity connection is being used. “Domestic” applies to electricity connections for houses or flats. Use “Commercial” for shops, offices, or other business connections. “Industrial” is for factories or workshops, while “Agricultural” applies to connections for tube wells and agricultural machinery. Selecting the correct category is essential, as electricity rates and certain charges vary across different consumer categories.
Step 4: Click ‘MEPCO bill calculator’
After entering all the necessary information, click the “Calculate Bill” button. The calculator will display the estimated bill amount and a breakdown of the charges. This may include charges such as the Energy Charge (based on units consumed), the applicable Fixed Charge (based on sanctioned load), the monthly FPA, and applicable GST. The benefit of this breakdown is that, rather than just looking at the total bill, you can understand the key components that make up the estimated amount.
Why is the 200-unit mark so significant?
For domestic consumers, the 200-unit threshold is crucial because rates differ between “Protected” and “Unprotected” consumer categories. Based on the information provided, looking only at the current month’s units is insufficient; consumption over the preceding six months is also vital for maintaining “Protected” status. If usage exceeds 200 units in any single month during this period, the “Protected” rates applied to future bills could be affected. For this reason, many consumers monitor their meter readings during the final days of the billing cycle. If consumption is already approaching the 200-unit limit, reducing unnecessary electricity usage can help keep monthly consumption under control.
To reduce high electricity usage, please also consult our MEPCO Peak Hours Guide, which outlines peak hours and practical methods for lowering electricity consumption. Understanding the charges shown in the calculator Your electricity bill is not based solely on the cost of units consumed; various charges combine to form the final amount. The Energy Charge is primarily calculated based on the units of electricity consumed and the applicable tariff or slab.
A Fixed Charge may be included for certain connections, depending on the sanctioned load or relevant tariff regulations. The FPA (Fuel Price Adjustment) is not a fixed or constant amount. This figure can vary from month to month; consequently, there may be a difference between the FPA amount used in the calculator and the amount on the actual bill.
- Similarly, GST and other applicable taxes also affect the total bill amount.
- If you wish to understand the various taxes, adjustments, and surcharges on your bill in detail, please consult our MEPCO Bill Taxes & Surcharges Guide.
- Important Note: The calculator provides an estimate only.
- Do not consider the figure generated by the MEPCO Bill Calculator as the final or actual MEPCO bill. The purpose of this tool is to provide an estimate of your upcoming bill so that you can plan your expenses in advance.
- Once the actual bill is issued, check it online and compare it with the calculator’s estimate. A slight difference between the two amounts is possible.
Why might the actual MEPCO bill differ?
- The calculator provides an estimate based on standard charges; however, due to certain factors, your actual bill may be lower or higher than the amount shown by the calculator.
- The FPA (Fuel Price Adjustment) can change every month. Since the FPA varies according to the specific billing period, a discrepancy may arise between the estimated and actual amounts.
- Arrears (outstanding dues) from previous bills can also cause a difference. If there is an unpaid balance from the previous month, it may be included in the new bill, whereas the calculator only estimates costs based on current consumption.
- Additional taxes or duties may also be included in some consumers’ bills. Applicable charges can vary depending on the consumer category and the nature of the bill.
- The meter reading date is also significant. If the reading is taken later than usual, the billing period covers more days, potentially resulting in a higher number of consumed units.
- Therefore, when comparing the calculator result with the actual bill, do not look solely at the total amount. Compare the Units Consumed, Energy Charges, FPA, Taxes, Arrears, and other charges individually. If there is a significant discrepancy between the two, or if you believe the meter reading was recorded incorrectly, please contact our MEPCO Helpline. Check the “Bill Correction Guide” for the next steps.
What to do after using the calculator?
After obtaining an estimate from the calculator, wait for the actual bill to arrive; then, check your MEPCO bill online and compare it with the estimated amount. If you do not understand the various line items and taxes on the bill, please read the “MEPCO Bill Taxes Guide.” If the bill amount is high and paying it in a lump sum is difficult, you can learn about the installment process in the “MEPCO Bill Installment Guide.” Also, consult our “MEPCO Bill Payment Methods Guide” for available payment options.
Remember: The calculator helps you estimate your electricity bill, but you should always make payments based on the “payable amount” listed on the actual bill issued by MEPCO.
If the actual bill looks different from your estimate, compare it with previous months using our MEPCO old bill check guide, get a copy from the MEPCO duplicate bill page, or see the MEPCO complaint number guide to register a complaint.
This MEPCO bill calculator gives an estimate only. For the official rates, see the Tariff Structure page on the official MEPCO website.
FAQS
01 How accurate is the MEPCO Bill Calculator?
This calculator displays an estimated bill based on 2026 electricity rates. However, the actual MEPCO bill amount may vary slightly due to changes in FPA, taxes, and other charges.
02 What information is required to use the MEPCO Bill Calculator?
You primarily need to enter your electricity consumption in units and select the appropriate consumer category. Domestic consumers may also need to select either Protected or Unprotected status, as applicable.
03 Where can I find my Sanctioned Load?
The Sanctioned Load is listed on your electricity bill under the heading “Sanctioned Load” or “Load” and is typically displayed in kW.
04 Why does the FPA sometimes appear as a negative value?
The Fuel Price Adjustment (FPA) can be negative if the actual fuel cost during the relevant period is lower than the projected cost. In such cases, the FPA reduces the total amount payable rather than increasing the bill.
05 Can the MEPCO Bill Calculator be used for shops or tube wells?
Yes. Select the Commercial category for shops or business connections and the Agricultural category for tube wells or agricultural connections. The Protected and Unprotected options are primarily for domestic consumers.
